- +86-13790736810
- info@edrisolar.com
- edrisolar
EDRI Solar provides a wide range of solar roof hook for tile roof. You can find suitable roof hooks for flat tile roof, clay tile roof, ceramic tile roof, concrete tile roof, and slate roof solar mounts.
Manufacturing photos：
 |
 |
 |
| Use a chalk line to mark the roof | Remove the tile where you are installing the hook by gently pulling and pushing the till. | Drill three pilot holes. |
 |
 |
 |
| Backfill pilot holes with sealant | Place the hook on top of the rafter to which it will be installed. Make sure the hook is in contact with the tile below it to prevent damage to the roof. |
Drive three 3/8”/M6.3 bolts into the rafter to secure the hook in place. |
 |
 |
 |
| Return the tile to its original location. | Loosely install a M8*25 inner hex bolt and a rail nut to the hook, then tilt the nut into rail groove. | Tighten the M8*25 bolt to secure the rail to the hook. |
We will arrange for a sales manager to contact you immediately.
